Types of chainsaw

Saw machines have a construction that varies according to the size, shape, and type of workpiece material to be cut. For this reason, carefulness is needed for someone to be able to operate the saw itself and can cut the workpiece properly and correctly.
Chainsaws are devices that use hard cutting metal or wire with rough edges to cut softer material. The cutting edge of the metal looks jagged or rough. Chainsaws can be used by hand or supported by electricity. In the meantime, perhaps you should take a look at the electric chain saws ratings  as well.

Types of the chainsaw that you may need to know:

1. Hacksaw-Machine

This sawing machine generally has a saw blade with a length between 300 mm to 900 mm with a thickness of 1.25 mm to 3 mm with the number of teeth averaging between 1 to 6-inch diameter teeth with HSS material. Because it moves back and forth, the time spent cutting is 50%.

2. Dish sawing machine (Circular Saw)

The diameter of the saw blade can reach 200 to 400 mm with a thickness of 0.5 mm with an accuracy of serration on the circumference of the dish having a height between 0.25 mm to 0.50 mm. in the sawing process, coolant is always used. Tolerance can be achieved between approximately 0.5 mm to approximately 1.5 mm. the working principle of circular saws uses the eye in the form of a rotating disc when cutting.

3. Carved Saw Machine (Jigsaw)

The Jig Saw is often called a jigsaw because indeed a jigsaw is a device that can be used to cut or saw (mostly wood) with any shape ranging from curved curves to straight lines. So the advantage of Jigsaw is that it can cut in a non-straight pattern because the average saw can only cut straight. The principle is that the jigsaw saw moves up and down when cutting.

4. Band Saw Machine

The sawing machine described earlier is a saw for straight cutters. In the case of a band saw machine it is unique that it is capable of cutting in irregular or irregular curves. The speed of the saw blade varies from 18 m / minute to 450 m / minute so that it can meet the cutting speed of various types of workpiece material.